Product Overview

Industrial 4-port Lite-managed PCI Ethernet Switch Card

Product Description

Manufacturer: Oring

Highlights
 
 Supports O-Ring (recovery time < 10ms over 250 units of connection), RSTP/STP (IEEE 802.1w/D) for Ethernet Redundancy
 Multiple notification for warning of excepted event
 Web-based and Windows utility (Open-Vision) configuration
 Complied with PCI Bus specification, Rev 2.2
 Redundant power inputs:PCI power and external power. Relay output for power failure and port link down.
 Supports 10/100 Base-T(X)
 
 
Features
 
 
World’s fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
 
Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect your industrial network
 
SNMP v1 support for secured network management
 Configurable by Web-based and Windows utility (Open-Vision)
 
Event notification through Syslog, Email, and SNMP trap.
 
Complied with PCI Bus specification, Rev 2.2
 Provided two sets of redundant DC power inputs
 
 
Introduction
 
ICP-4040 is an innovative PCI-bus lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports. It immediately upgrades current IPC/embedded system to redundant Ethernet network. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ICP-4040 is able to handle different types of network configuration, such as Network + Device Redundant, Network Redundant, Device Communication Redundant and Ethernet Switch. In addition, ICP-4040 provides users with PCI and external redundant power inputs, guarantees a non-stop operation. Normally, PCI bus can supply primary power, when the host device shuts down; ICP-4040 is able to work through external power continuously. Therefore, ICP-4040 is the best solution to upgrade current IPC system into redundant Ethernet world.
 
 
Open-Vision
 
In IAR-7002-WG/WG+, there are 3 modes of routing functions supported: Dynamic/Static IP route, PPPoE dial up, and Modem dial up. IAR-7002-WG/WG+ also support NAT, VPN and Back up functions. You can build up the wireless network and connect to the Internet easily.